Arrange a Demo/Contact Us
The C-1800 Fibre Blowing Machine (Accelair 2) has been developed to provide a simple to use and reliable fibre blowing solution.
The C-1700 AirStream cable blowing machine has been designed to maximise protection for micro cables with a compliant double drive concept, backed by the latest technology in servo controls to provide precise control of torque and speed.
1550Kg Payload EEC Cable Drum Trailer illustrated here with optional Drum Brake, Light Guards and Number Plate Holder
This Compressor is specifically for use with blowing micro-cables into micro-ducts, having 15 bar pressure with 1000 litres/m (35.3 cfm) flow.
The duct rod pushers are designed to assist in rodding operations. The units are mounted on sturdy, anti corrosion treated tubular steel frame, and fitted with gel filled puncture proof tyres, with hydraulic controls mounted on the frame for ease of transportation.
10 Bar compressor
Designed for blowing fibre (Unlike majority of alternatives)
Consistent airflow (no undulation)
Created for Openreach and their FTTP network
Low maintenance design
Lightweight for easy movement to site (24.5kg)
Unique connecting rod for perfect balance
Automatic airflow regulator (maximises blowing distance)
Built in aftercooler and moisture trap
Designed specifically for fibre optic blowing (Unlike alternatives, it isn’t about maximising air flow)
Low maintenance
Oversized engine to maximise compressor life and fuel efficiency
The hydraulic drum jack range is ideal for use in cable yards and on site alike, with a large drum range, the jacks are very flexible and raising of the drum is effortless.
Available in 3, 6.5 and 10 tonne capacity – See Spec Sheet
JETTING FTTX BLOWING COMPRESSOR
The compact engine driven ( petrol) compressor makes the FTTH installation easier. With 10 bar and 275 liter / minute combined
with an effective build on aftercooler and humidity filter, this compressor make you totally independent of power supply .
JetAir 100275 is build for optimal fiber blowing into microduct with internal ø up to 4 mm, but can also be used for shorter distances in
duct up to 10 mm internal.
The lightweight but still robust construction make the transport and setup for blowing very easy. Combined with Jettings Trigg AIR
or the V0 fiber blowing machine you have a perfect match. The JetAir 100275 comes with a 10 m Air hose
Compact and effective asymmetrical screw-type compressor with aftercooler,
optimized for professional fiber blowing.
The JETAIR 140700 / 141000 is powered with a 2 cylinder, 23 Hp Vanguard Briggs
& Stratton petrol engines with electric start. The compressor supply
1.0m³ / min at 14 Bar.
EU-version 0.7 m³/min. at 14 bar.
The compact and open design makes is lightweight (only 148 Kg.) securing a
very flexible and mobile compressor
etLogger is a professional documentation system for the installer
who need an efficient and professional electronic documentation
of the cable blowing process. Jetlogger is developed together with
installers , network owners and approved by German Telecom – ZTV
TKNetz 40. Jetlogger can be delivered to following models: V0- V0
HD- V2 and V3
LUBRICATION UNIT FOR JETTING
FIBERBLOWERS V2 & V3
• Easy to use
• No electricity needed
• Quick connection to machine
• Easy deaerate and drain
• Adjustable amount
• Low air consumption
• Compact size
• Low noise level (75dB)
FLUID PRESSURE* 18 BAR
AMOUNT PER STROKE 0,5 ml
ADJUSTABLE AMOUNT´ 0,5 ml to 80 ml
AIR CONSUMPTION <10 l/min
WEIGHT 6 kg
SIZE 330 X 250 X 150
TANK 500 ml
NOISE LEVEL 75 dB
Jetpressure is a professional unit for the installer who needs an assistant
and professional electronic documentation of the pipe. The device is used
together with the Jetting Jetlogger. The Jetlogger and the unit is developed
together with installers who saw the need to check the condition of the pipe.
The C-1900 has been designed to provide maximum cable protection, combined with the performance and reliability of hydraulic drive. The profiled double drive belt system is driven by single 32cc hydraulic motor, powered by the proven C-1203-F power pack.
Robust handheld battery powered fiber blowing tool optimized for FTTX
installation of blown fiber (EPFU) and micro/nano cables, from 0,8 to
3 mm into duct size 3, 5 and 7 mm. The effective fiber security, and
adjustable clamping force secures that all cable designs can be installed
effective and safe. Delivered in strong transport case with batteries,
charger and an assortment of cable seals. Ready to blow!
Gigabit Utility Supplies are suppliers of fibre blowing machines of premium quality.
