Jetpressure is a professional unit for the installer who needs an assistant
and professional electronic documentation of the pipe. The device is used
together with the Jetting Jetlogger. The Jetlogger and the unit is developed
together with installers who saw the need to check the condition of the pipe.
INSTRUCTION MANUAL
JETPRESSURE
1. Connect air supply to pipe
2. Connect Jetpressure
3. Connect Jetlogger to Jetpressure, power on Jetlogger
4. Calibrate Jetpressure
4.1. Press stop and minus button at the same time for 2 seconds
5. Enter position data and pipe parameters
5.1. Choose ”Pressure tester” in menu Machine / Compressor
6. Start session
7. Start compressor and supply air
8. Fill pipe to maximum. Close valve
9. Jetpressure record data every 60 seconds
10. Recommended time for data collection 5-10 minutes
11. End session
12. Save data
13. Release air from pipe
Important, open valve and release air from pipe before disconnecting Jetpressure from pipe.
Risk of personal injury when disconnecting the pressure tester when the duct is pressurized
